Bull NovaScale T840 E2, User Manual

Page: 158 / 210

User Guide
158
www.bull.com
The system displays the message below and fails to log on:
This copy of Windows must be activated with Microsoft before you can continue. You
cannot log on until you activate Windows. To shut down the computer click Cancel.
In Windows Server 2003, the above message will be displayed if you use the operating
system without executing the license authentication. Select "Yes", and execute the
procedure for license authentication.
Cannot install the operating system correctly.
■
Did you check the notes on installing the operating system?
During installation, the following warning is registered in the System Log of the Event
Viewer:
Error detected on the device \Device\CdRom0 during the paging operation.
- There is no problem on this issue.
Fail to start the OS:
■
Is a floppy disk in the floppy disk drive?
- Take out the floppy disk and restart the system.
■
Is the ExpressBuilder disc in the disc drive?
- Take out the ExpressBuilder disc and restart the system.
■
Is the OS broken?
- Use the recovery process to recover the system.
The OS presents unstable operation:
■
Did you update the system?
- Installing a network drive after installation of the OS may cause unstable opera-
tion. Use the ExpressBuilder disc to update the system.
The system does not restart automatically when a stop error occurs, though the
system is adjusted to automatically restarting:
- When the system does not restart automatically, restart it manually.
The system restarts automatically when a stop error occurs, though the system is
NOT adjusted to automatically restarting:
- There is no problem about this issue. Check the System Event Log to check that
STOP error occurred.
Cannot turn the power OFF at the blue screen:
- If you want to turn off the power at the blue screen, execute forced shutdown
(forced shutdown: continue to press POWER/SLEEP switch for 4 seconds). The
power will not be turned off if you press the switch for less than 3 seconds.