Bull NovaScale 5 5 Series, User Manual

Page: 137 / 384

4-13
Monitoring the Server
Viewing Detailed Hardware Information
For detailed information about module / component / sub–component status, you can either
click the corresponding hotspot in the
Hardware Monitor Control pane or click the required
hardware element in the PAM Tree to open the Hardware Status page.
General Tab
The
General
tab gives access to the following information:
Presence Status
Indicates if the hardware element is physcially present and correctly
configured. See
Presence Status Indicators , on page 4-6.
Functional Status
Indicates if the hardware element is functioning correctly.
See
Functional Status Indicators , on page 4-7.
NOTE:
Functional Status is a composite indicator summarizing Failure
Status, Fault Status, Power Status, and Temperature Status
indicators, where applicable.
Failure Status
Indicates if a failure has been detected on the hardware element.
NOTE:
This feature is reserved for future use.
See
Failure Status Indicators , on page 4-14.
Fault Status
Indicates if a fault has been detected on the hardware element.
See
Fault Status Indicators , on page 4-14.
Display Faults Lis t When a fault is detected, a fault message is generated and the
Display Faults List button gives direct access to the list of faults
recently encountered by this hardware element.
See
Consulting Event Messages, the Hardware Faults List, and
History Files , on page 4-26.
Exclude Status
The Exclude checkbox is used to logically exclude/include hardware
elements from the domain.
See
Excluding / Including Hardware Elements , on page 4-21.
Locked State This feature is reserved for future use.
Figure 78.
General Hardware Status page (example)