Bull NovaScale 5 5 Series, User Manual

Page: 71 / 384

2-19
Getting Started
Preparing Server Domains for Remote Access via the
Enterprise LAN
CAUTION:
Access to the local / integrated console should be restricted to Customer / Support
Administrators and Operators ONLY to avoid inadvertent damage to software and/or
hardware components.
Note:
Required networking data is indicated in the Read Me First document delivered with the
server and is also recorded under the corresponding PAM Domain Identity .
Customer Administrator rights are required for all PAM configuration tasks.
Microsoft Windows Domain
1. Toggle the integrated console to the corresponding Windows domain port. See Toggling
the Local / Integrated Console Display , on page 2-8.
2. From the Windows desktop, right click
My Computer
and select
Properties
→
Remote
.
3. Check the
Allow remote connection
box.
4. Share the <system root>
\system32\clients\tsclient
directory via the Explorer.
5. Toggle the integrated console to the PAP unit port.
6. From the Customer Administrator PAM tree, click Configuration Tasks
→
Domains
→
Identities to open the Identities page.
7. Select the corresponding Windows domain from the list and click Edit to open the Edit
an Identity dialog.
8. Check that the Network Name , IP Address , and URL fields are completed. If not,
complete these fields with the networking data entered during the Windows setup
completion procedure and click
OK .
Linux Redhat Domain
1. Toggle the integrated console to the corresponding Linux domain port. See Toggling the
Local / Integrated Console Display , on page 2-8.
2. From the Linux desktop, enable remote connection via
telnet, rlogin, ftp,
...:
3. From the PAP unit Internet Explorer or Mozilla browser, enter the Webmin URL:
http:// <networkname> :10000 , where <networkname> is the network name given to
the server domain during the Linux setup completion procedure.
The
Login to Webmin dialog box opens.
4. Click the Networking icon. The Networking main page opens.
5. Click Extended Internet Services to display the list of available services.
6. From the service list, check that Yes is displayed in the status column. If No is displayed
in the status column, proceed as follows to enable the service:
a. Select the required service from the list.
b. Complete the fields accordingly.
c. Click Yes after Service enabled?
d. Click
Save
.
7. Repeat step 3 for each required service.