Bull NovaScale 5 5 Series, User Manual, Page: 60 / 384

2-8
User’s Guide
Toggling the Local / Integrated Console Display
During the powering up / down sequences, you will be requested to toggle the local /
integrated console from the PAP unit display to the server domain display, or vice versa, as
explained below.
CAUTION:
Access to the local / integrated console should be restricted to Customer / Support
Administrators and Operators ONLY to avoid inadvertent damage to software and/or
hardware components.
The KVM Switch allows the integrated console to be used as the local server domain and
local PAP unit console. KVM ports are configured as shown in Table 4.
8–Port KVM Switch Console Display Domain
Port 1 PAP Unit N/A
Port 2 CSS0–Mod0–IO0 MyOperations–xx–1
Port 3 CSS0–Mod0–IO1 MyOperations–xx–2
or
16–Port KVM Switch Console Display Domain
Port 1 PAP Unit N/A
Port 3 CSS0–Mod0–IO0 MyOperations–xx–1
Port 4 CSS0–Mod0–IO1 MyOperations–xx_2
Port 5 CSS0–Mod1–IO0 MyOperations–xx–3
Port 6 CSS0–Mod1–IO1 MyOperations–xx–4
Table 4. KVM port configuration
You can easily toggle from the server domain display to the PAP unit display, or vice versa:
1. From the keyboard, press the Control key twice to display the KVM Switch Command
Menu.
2. Select the required port with the
↑↓
keys and press Enter .
3. The selected display appears on the Console monitor.