Bull NovaScale 5 5 Series, User Manual

Page: 72 / 384

2-20
User’s Guide
8. Click Apply changes to apply all changes.
9. Click Return to index .
10.Click Log Out to exit Webmin .
11. Toggle the integrated console to the PAP unit port.
12.From the Customer Administrator PAM tree, click
Configuration Tasks
→
Domains
→
Identities
to open the
Identities
page.
13.Select the corresponding Windows domain from the list and click
Edit
to open the
Edit
an Identity dialog.
14.Check that the Network Name , IP Address , and URL fields are completed. If not,
complete these fields with the networking data entered during the Windows setup
completion procedure and click
OK .
Linux SuSE Domain
1. Toggle the integrated console to the corresponding Linux domain port. See Toggling the
Local / Integrated Console Display , on page 2-8.
2. From the Linux desktop, enable remote connection via telnet, rlogin, ftp, ...:
3. Launch the
yast2
command to open the
Yast Control Center
screen.
4. Click the
Network/Basic
icon in the left pane.
5. Click
Start/stop services (inetd)
.
6. From the
Network Services
page, select
On with customer configuration
and click
Next to open the Enable/disable network services page.
7. From the service list, check that Active is displayed in the status column. Proceed as
follows to enable the service:
a. Select the required service from the list.
b. Click Activate .
8. Repeat step 5 for each required service.
9. Click Finish to apply all changes.
10.Click Close to exit yast2 .
11. Toggle the integrated console to the PAP unit port.
12.From the Customer Administrator PAM tree, click Configuration Tasks
→
Domains
→
Identities to open the Identities page.
13.Select the corresponding Windows domain from the list and click Edit to open the Edit
an Identity
dialog.
14.Check that the
Network Name
,
IP Address
, and
URL
fields are completed. If not,
complete these fields with the networking data entered during the Windows setup
completion procedure and click
OK .