Bull NovaScale 5 5 Series, User Manual

Page: 114 / 384

3-38
User’s Guide
Removing Cells from a Domain
Notes:
•
At least one Cell, containing one IOC and one QBB, must remain.
•
The domain must be INACTIVE before configuration changes can be made.
•
When you remove a Cell from a NovaScale 6085 Server domain, the server can either
operate as a single SMP system, using only the hardware resources in the remaining
Cell, or as two SMP systems if the removed Cell is allocated to another domain.
Warning:
When you remove a Cell from a domain, the devices attached to the corresponding
IOC board are no longer available for this domain.
To remove Cells from a domain:
1. Click Domain Manager to open the Control pane.
2. Select the required domain.
3. Click Modify in the Command bar to open the Modify Domain dialog.
Note:
The Modify Domain dialog can also be accessed from the View Domain dialog.