Bryant Evolution Connex SYSTXBBECC01-, Installation Instructions Manual, Page: 27 / 112

18
A12178
5.2. Searching for Outdoor Unit
The Evolution Connex Control will then proceed to communicate with the outdoor
unit by displaying “Searching for outdoor unit”. This includes Evolution small
packaged products (SPP) and Evolution System geothermal units.
NOTE : If the outdoor unit cannot be found, the control will display “Outdoor unit
not found”.
S
Select the appropriate unit installed; then, touch NEXT .
d
AC1Stage – 1--stage air conditioner
d
*AC2Stage – 2--stage air conditioner
d
*HP1Stage
– 1--stage heat pump
d
*HP2Stage – 2--stage heat pump
d
None – No outdoor unit installed
NOTE : For some communicating products (SPP and geothermal package units),
the selection screen may not be needed and may not appear.
S
The installer will first be instructed to select the appropriate size of the outdoor
unit; then, touch
SELECT
.
*Network Interference Module (NIM) may be required for these selections to be displayed.