BRP SPARK SERIES, Operator'S Manual

Page: 40 / 148

PRE-RIDE INSPECTION
To access the engine compartment,
turn the LH access cover knob 1/4 turn
clockwise, then pull out to unsnap the
rear portion and slide rearward to re-
move.
smo2015-005-005_a
LH ACCESS COVER
1. To unlock, turn the knob 1/4 turn clockwise
smo2014-005-002
ENGINE COMPARTMENT - LH ACCESS
COVER REMOVED
Reinstall the LH access cover in the re-
verse of the removal procedure and
lock the knob by turning it 1/4 turn
counterclockwise.
smo2015-005-005_b
LH ACCESS COVER
1. To lock, turn the knob 1/4 turn
counterclockwise
Engine Oil
Ensure oil level is within specification
as described in
MAINTENANCE PRO-
CEDURES
section.
Engine Coolant
Ensure coolant level is within specifi-
cation as described in
MAINTENANCE
PROCEDURES
section.
Check for coolant leaks on engine, in
bilge and from heat exchanger.
CAUTION When operating
the engine with the watercraft out
of the water, the engine and heat
exchanger may become very hot.
Avoid any contact with hot engine
parts and the heat exchanger as
burns may occur.
Steering System
If steering is misaligned, follow align-
ment instructions in
MAINTENANCE
PROCEDURES
section.
Assisted by another person, check
steering operation for free movement.
When the handlebar is horizontal,
the jet pump nozzle should be in the
straight ahead position. Turn the han-
dlebar from left to right and make sure
nozzle turns.
38
_______
SAFETY INFORMATION
________