BRP SPARK SERIES Operator'S Manual Download

Page: 1 / 148

Read this guide thoroughly.

It contains important safety information.

Minimum recommended operator’s age: 16 years old.

Keep this Operator’s Guide in the watercraft.

2015

OPERATOR’S

Includes Safety, Watercraft and

Maintenance Information

GUIDE

2015

SERIES

SPARK

FAIT AU / MADE IN CANADA U/M:P.C

219 001 395

OPERATOR’S GUIDE, SEA-DOO SPARK SERIES / ENGLISH

GUIDE DU CONDUCTEUR, SÉRIE SEA-DOO SPARK / ANGLAIS

®™ AND THE BRP LOGO ARE TRADEMARKS OF BOMBARDIER RECREATIONAL PRODUCTS INC. OR ITS AFFILIATES.

2 1 9 0 0 1 3 9 5

SPARK

Original Instructions

WARNING

Disregarding any of the safety precautions and instructions contained in

this Operator’s Guide,

SAFETY DVD

video and on-product safety labels

could cause injury including the possibility of death!

CALIFORNIA PROPOSITION 65 WARNING

WARNING

This vehicle contains or emits chemicals known to the state of California to

cause cancer and birth defects or other reproductive harm.

In Canada, products are distributed by Bombardier Recreational Products Inc.

(BRP).
In USA, products are distributed by BRP US Inc.
This is a non-exhaustive list of trademarks that are the property of Bombardier

Recreational Products Inc. or its affiliates:

ACE

iTC

Sea-Doo

iBR

O.T.A.S.

SPARK

iControl

Rotax

XPS

smo2015-005 en JT
®™ and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates.
©2014 Bombardier Recreational Products Inc. and BRP US Inc. All rights reserved.

Summary of Contents for SPARK SERIES





















































































































































Search results

Summary of Contents for SPARK SERIES

Reviews:

Related manuals for SPARK SERIES

Brands by name

Popular brands

BRP SPARK SERIES, Operator'S Manual

Search results

Summary of Contents for SPARK SERIES

Reviews:

Related manuals for SPARK SERIES

Brands by name

Popular brands