BRP SPARK SERIES, Operator'S Manual

Page: 38 / 148

PRE-RIDE INSPECTION
WARNING
Perform a pre-ride inspection before each ride to detect potential problems
during operation. The pre-ride inspection can help you monitor wear and
deterioration before they become a problem. Correct any problems that
you discover to reduce the risk of a breakdown or crash.
Before performing the pre-ride inspection, read and understand the CONTROLS
section.
What to Do Before Launching the Watercraft
WARNING
Engine should be off and the tether cord cap should always be removed
from the engine cut-off switch prior to verifying any of the following points.
Only start watercraft once all items have been checked and operate prop-
erly.
Check the items listed in the following table before launching the watercraft.
ITEM OPERATION
✓
Hull Inspect.
Jet pump water intake Inspect/clean.
Drain plug Tighten.
Fuel tank Refill.
Engine compartment
Check for any visible fluid leaks and
gasoline vapor odor.
Engine oil level Check/refill.
Engine coolant level Check/refill.
Heat exchanger condition Inspect.
Steering system Check operation.
Throttle lever Check operation.
iBR lever (models with iBR)
Check operation.
Storage bin front cover (if equipped),
glove box cover and seat
Ensure they are closed and latched.
Engine cut-off switch and engine
START/STOP button
Check operation.
36
_______
SAFETY INFORMATION
________