BRP SPARK SERIES, Operator'S Manual

Page: 54 / 148

EQUIPMENT
To install the seat, position the seat in
place and push the seat forward until
the latch clicks.
Pull up on the rear portion of the seat to
ensure it is properly latched.
5) Passenger Handholds
The seat strap provides a handhold for
a passenger to hold on to when riding.
The sides of the molded grab handle at
the rear of the seat also provide a hand-
hold for a passenger.
NOTICE
Never use the molded
grab handle to tow anything or to lift
the watercraft.
smo2014-005-017_a
TYPICAL - PASSENGER HANDHOLDS
1. Seat strap
2. Molded grab handle
The rear portion of the molded grab
handle also provides a handhold for the
skier/wakeboarder spotter (3up mod-
els) or for boarding the watercraft from
the water.
6) Boarding Step
(Convenience Package)
A convenient step used for boarding
the watercraft from the water.
smo2014-005-047_a
TYPICAL
1. Boarding step
WARNING
The engine must be shut off before
attempting to board the watercraft
using the boarding step.
Pull down the step with your hand and
hold until a knee is put on the step.
smo2014-005-013_a
BOARDING STEP HELD DOWN FOR
BOARDING FROM WATER
52
______________