BRP SPARK SERIES, Operator'S Manual

Page: 115 / 148

MONITORING SYSTEM
Beeper Code Information
BEEPER CODES DESCRIPTION
Defective engine cut-off switch.
Seek service from an authorized Sea-Doo dealer, repair
shop, or person of your own choosing for maintenance,
repair, or replacement. Please refer to the
US EPA
EMISSIONS-RELATED WARRANTY
contained herein
for information about warranty claims.
1 long beep
(when installing tether
cord on engine cut-off
switch
Improper operation of ECM or defective wiring
harness.
Refer to an authorized Sea-Doo dealer.
A 2 second beep
every 15 minute interval
Engine management system fault.
Seek service from an authorized Sea-Doo dealer, repair
shop, or person of your own choosing for maintenance,
repair, or replacement. Please refer to the
US EPA
EMISSIONS-RELATED WARRANTY contained herein
for information about warranty claims.
Low fuel level.
Refill fuel tank. If problem persists, refer to an authorized
Sea-Doo dealer.
A 2 second beep
every 5 minute interval
Fuel tank level sensor or circuit malfunction.
Refer to an authorized Sea-Doo dealer.
High engine coolant temperature.
See
ENGINE OVERHEATING
.
High exhaust temperature.
Seek service from an authorized Sea-Doo dealer, repair
shop, or person of your own choosing for maintenance,
repair, or replacement. Please refer to the
US EPA
EMISSIONS-RELATED WARRANTY
contained herein
for information about warranty claims.
Continuously beeps
Low oil pressure.
Turn off engine as soon as possible. Check oil level
and refill. Seek service from an authorized Sea-Doo
dealer, repair shop, or person of your own choosing for
maintenance, repair, or replacement. Please refer to the
US EPA EMISSIONS-RELATED WARRANTY contained
herein for information about warranty claims.
NOTICE
If the monitoring beeper continuously sounds, stop engine as
soon as possible.
______________
113