BRP SPARK SERIES, Operator'S Manual

Page: 42 / 148

PRE-RIDE INSPECTION
Multifunction Gauge
1. Press engine START/STOP button
and install the tether cord cap on the
engine cut-off switch.
2. As the multifunction gauge cycles
through its self-test function, en-
sure all indications come on.
WARNING
Always attach the tether cord clip
to your PFD or to the wrist (wrist
strap required).
iBR System (Models with iBR)
NOTICE
Ensure there is sufficient
space ahead and behind watercraft
to safely carry out the iBR system
test to avoid a collision. Watercraft
will move during test.
1. Remove the moorings securing the
watercraft to the dock.
2. Start the engine and ensure the wa-
tercraft does not move.
3. On the left handlebar, depress the
iBR lever completely in, the wa-
tercraft should move slowly back-
wards.
4. Release the iBR lever, there should
not be any reverse thrust.
WARNING
Always ensure proper iBR system
operation before taking the water-
craft out for a ride.
40
_______
SAFETY INFORMATION
________