BRP SPARK SERIES, Operator'S Manual

Page: 89 / 148

MAINTENANCE PROCEDURES
TIGHTENING TORQUE
Self-tapping
screw
4.5 N•m ± 0.5 N•m
(40 lbf• in ± 4 lbf• in )
7. Reinstall the seat. Refer to
SEAT
in
EQUIPMENT
subsection.
8. Position rear panel trims in place by
sliding towards the inside of PWC
and
install self-tapping screws.
Tighten to the recommended
torque.
smo2014-005-090_a
1. Rear panel trims
TIGHTENING TORQUE
Self-tapping
screw
5.5 N•m ± 0.5 N•m
(49 lbf• in ± 4 lbf• in )
9. Connect the steering connector.
smo2014-005-034_a
1. Connector
10. Connect steering cable in reverse
of removal procedure.
11. Close knee pad and LH access
cover and lock the knob by turn-
ing it 1/4 turn counterclockwise.
smo2015-005-005_b
LH ACCESS COVER
1. To lock, turn the knob 1/4 turn
counterclockwise
Battery
Battery Access
Turn the LH access cover knob 1/4 turn
clockwise, then pull out to unsnap the
rear portion and slide rearward to re-
move.
smo2015-005-005_a
LH ACCESS COVER
1. To unlock, turn the knob 1/4 turn clockwise
_______________
87