Section 08 CHASSIS
Subsection 06 (BODY)
V07L05A
1
2
1. Insert these tabs in hooks
2. Hooks
NOTE:
A distinctive snap will be felt. Double
check that the seat is secure by giving it a tug to
confirm proper latching.
WARNING
Make sure seat is securely latched before rid-
ing.
Seat Cover Replacement
Remove the old seat cover. Check the foam and
replace if necessary.
Install staples with an electric tacker such as Ar-
row tacker no. ETN-50 or with a manual tacker
such as Arrow tacker no. T-50.
NOTE:
For an easier installation, it is highly recom-
mended to use an electric tacker.
Ensure that the seat rest firmly against a hard sur-
face such as a piece of wood. This is done to get
the staples completely pushed in place.
A35H0HA
2
1
TYPICAL
1. Piece of wood
2. ETN-50 (electric)
After cover installation cut all around the excess
of material.
CONSOLE
vmr2008-149-006_a
TYPICAL
1. Console
2. Side panels
3. Ignition switch
4. 12-volt power outlet
5. Hazard warning button (CE models)
NOTE:
On 2009 CE models, the hazard warning
lights button is located on the LH multifunction
switch.
Console Removal
Remove seat(s).
On each side, come off side panel studs from con-
sole grommets.
vmr2008-149
411
Summary of Contents for Outlander 400 EFI 2008
Page 2: ......
Page 433: ...2008 2015 OUTLANDER 400 EFI vdd2014 001 001 GENERAL SYSTEM...
