BRP Outlander 400 EFI 2008, Service Manual

Page: 160 / 434

Section 03 ENGINE
Subsection 10 (CRANKCASE/CRANKSHAFT)
1
R400motr31A
1. Connecting rod screw
Measure crankpin. Compare to inside diameter of
connecting rod big end.
2
1
R400motr32A
1. Micrometer
2. Crankpin area for plain bearings
To measure the connecting rod big end diameter,
use the
OLD screws no. 7 .
Install the OLD plain bearings no. 8 as they were
mounted initially.
Do the torque procedure as described further.
R400motr33A
A
A. Connecting rod big end plain bearing
CRANKSHAFT PIN DIAMETER
NEW
40.009 to 40.025 mm
(1.575 to 1.576 in)
SERVICE LIMIT 39.980 mm (1.574 in)
CONNECTING ROD BIG END DIAMETER
SERVICE LIMIT 40.100 mm (1.579 in)
CONNECTING ROD BIG END RADIAL PLAY
SERVICE LIMIT 0.09 mm (.0035 in)
Crankshaft Radial Play MAG/PTO Side
Measure crankshaft on MAG/PTO side. Compare
to inside diameter of MAG/PTO plain bearings.
1
2
R400motr34A
1. Micrometer
2. Crankshaft area for MAG plain bearing
156
vmr2008-129