BRP E250DHLSCS, Service Manual

Page: 241 / 396

239
POWERHEAD
POWERHEAD INSTALLATION
11
Install air temperature sensor, air silencer, and fly-
wheel cover. Tighten flywheel cover screws to a
torque of 30 to 42 in. lbs. (3.5 to 5 N·m).
Install the lower engine covers. Refer to
LOWER
COVER SERVICE
on p. 89.
IMPORTANT:
Perform the following procedures
before returning outboard to service:
•
Index all spark plugs. Refer to Spark Plug
Indexing
on p. 82.
•
Adjust timing pointer and check engine timing.
Refer to
TIMING ADJUSTMENTS
on p. 147.
•
Use
Evinrude Diagnostics
software to start pow-
erhead break-in oiling. Refer to
Powerhead
Break-In
on p. 104.
•
Prime oiling system. Refer to Oiling System
Oil
Supply Priming
on p. 59.
•
Run outboard and check for water, fuel, or oil
leaks.
•
Make sure engine reaches correct operating
temperature and does not overheat.
1. Air temperature sensor
004219
1