5.2 Place a sheet of paper on windshield to
protect it, refer to illustration.
NOTICE
If this precaution is not taken,
scratch on the windshield may occur and
will not be covered under warranty.
rbl2010-002-028
5.3 Insert trim panel into windshield slot and
push it upwards.
5.4 From inside windshield, secure trim panel
using M5 x 25 countersunk Torx screw
(from PDI kit).
rmr2010-038-043_a
1. Windshield trim panels screws
5.5 Torque windshield trim panel screws.
PART
TORQUE
Windshield trim panel
screw
2.5 N•m (22 lbf•
in
)
6. Remove sheet of paper.
Antenna
1. Detach antenna from the sub-crate.
rbl2010-002-033_a
1. Antenna
Antenna With Self-Locking Product
rbl2011-001-005_a
1. Self-locking product already applied
Install the antenna on the RH side of the rear cargo
module (tighten by hand) and position the rubber
cap.
Hang Tag and Safety Labels
This vehicle comes with a hang tag and labels
containing important safety information.
The
labels are considered permanent parts of the
vehicle and should not be removed. Hang tag is
to be removed by the owner only.
Any person who rides this vehicle should read and
understand all the information given on hang tag
and safety labels before riding.
Safety labels of several language can be chosen
by customer, according to availability.
SERVICE
2013-2
21 / 47
