DESCRIPTION (LOCATION)
QTY
M6 caged nut (front cargo module)
1
Black M6 x 20 hexagonal flange screw (front
cargo module)
4
Gold M6 x 20 hexagonal flange screw (front
cargo module)
2
Plastic rivet (service cover)
2
Battery installation kit (2 bolts and 2 nuts)
(battery)
1
M6 x 20 Torx screw (front panels)
2
Plastic washer (front panels)
2
M14 jam nut (headlights)
2
M8 x 20 hexagonal flange screw (front
fenders)
8
M6 x 20 Torx screw (windshield)
4
M5 x 25 countersunk Torx screw (windshield)
2
M5 retaining nut (windshield)
2
Windshield spacer (windshield)
2
Ensure that the following items are included in-
side the rear cargo compartment:
DESCRIPTION
MODEL
QTY
iPOD
†
cable
– RT-S
– RT Limited
1
Audio auxiliary
cable
– RT-S
– RT Limited
1
Remove the antenna from the sub-crate.
Lifting the Front of Vehicle
WARNING
No one should be standing in front or at the
back of the vehicle while straps are being cut.
1. Remove plate retaining front of vehicle to crate
base by removing screws and nuts.
rbl2013-003-002_a
1. Plate
2. Screws
3. Screws and nuts
2. Remove strap retaining side of vehicle to crate
base.
rbl2010-002-011_a
TYPICAL
1. Side strap
NOTE:
The following steps will describe two
methods to lift the front of the vehicle. The
conventional one uses a hydraulic jack and the
alternate one uses a chain block. Use the proper
method according to your shop layout.
Conventional Method
1. Remove piece of wood located at the front of
the vehicle.
NOTE:
This piece of wood can be used to level the
jack at next step.
†iPod is a trademark of Apple Inc.
6 / 47
2013-2
SERVICE
