Setting the Time
To set the hours:
Select CLOCK in main category of Preferences
Screen.
rmo2011-001-202_a
Select HOURS in secondary category.
Adjust the unit value using the UP and DOWN ar-
row.
To set the minutes:
Select CLOCK in main category of Preferences
Screen.
rmo2011-001-201_a
Select MINUTES in secondary category.
Adjust the unit value using the UP and DOWN ar-
row.
Selecting the Hour Mode
To select the 12/24 hour mode:
Select CLOCK in main category of Preferences
Screen.
rmo2011-001-203_a
Select 12/24 HOUR in secondary category.
Select the appropriate value in main unit or set-
ting.
B.U.D.S. Programming
Always use the latest B.U.D.S. version on your
shop computer. It is available from the following
web site:
WWW.BOSSWEB.BRP.COM
Please note that the latest B.U.D.S. version is also
available in Knowledge Center.
NOTICE
During data transfer, make sure that:
– Voltage (12V) remains stable before starting
update. Charge the battery or use a power
pack to have enough power.
– Although screen ''freezes'' for a while, re-
main on the B.U.D.S. because update still
continues
– Never disconnect any cable while updating
ECM.
MANDATORY TOOLS
A personal computer (laptop or desktop)
MPI-2 INTERFACE CARD
(P/N 529 036 018)
MPI-2 DIAGNOSTIC CABLE
(P/N 710 000 851)
OPTIONAL TOOL
Extension cable
available at electronic retail outlets.
Do not exceed 7.5 m (25 ft)
NOTE:
B.U.D.S. is not used to program the hard
keys (included keys are ready to use).
Use B.U.D.S. to
– Enter Customer's Name
– Reset Trip Hours and Trip Distances
– Reset Last Service
– Set Speedometer Units
– Set Cluster Language
– Check fault codes (if any).
Connecting PC to Vehicle
1. Remove service cover from vehicle.
2. Connect the PC to vehicle. Refer to the latest
edition of
CAN-AM ROADSTER B.U.D.S. SOFT-
WARE AND COMMUNICATION TOOLS
for the
proper connecting procedure.
34 / 47
2013-2
SERVICE
