rmr2010-038-006_a
1. Rear retaining screw
6. Install upper retaining screws on top side panel.
rmr2010-038-005_a
1. Upper retaining screws
7. Install mirror:
7.1 Carefully position the mirror using the top
stud.
7.2 Firmly push the mirror inwards until it en-
gages with the two bottom studs.
8. Install retaining screws on lower wind deflector
and install the top side panel.
rmr2010-038-004_a
1. Retaining screws of wind deflector
rmo2010-008-003_e
INSTALLATION SEQUENCE
9. Install the grille on the panel.
10. Push the front of panel in its grommet.
11. Rotate the panel and clip it on the support.
12. Push the bottom of the panel in its grommet.
13. Push the rear of the panel in its grommet.
14. Push the top of the panel to fix the plastic
hook.
All Models
15. After installing storage compartment, reinstall
the fuse service covers as follows:
15.1 Position the fuse service covers and push
down carefully until the fuse service cov-
ers engage.
rmo2013-003-011_a
1. Left fuse service cover
2. Right fuse service cover
15.2 Zip the liner if applicable.
18 / 47
2013-2
SERVICE
