Brother P-Touch 580C User Manual Download Page 123

Page: 123 / 188

119

ERROR MESSAGE

CAUSE

REMEDY

BATTERIES WEAK

•

This message appears when

the installed alkaline batteries
become weak.

•

Replace the batteries or use

the AC adaptor.

BUFFER EMPTY!

•

This message appears if the

LABEL LENGTH, AREA

SEQ. NUMBERING

key is

pressed when the working
area buffer is empty.

•

This message appears if you

try to print, but no text has
been entered in to the working
area.

•

This message appears if you

try to store a message as a
text file, but no text has been
entered into the working area.

•

Enter some text before enter-

ing Label length, Area, or
Seq. numbering mode.

•

Enter text before printing.

•

Enter text before printing.

BUFFER FULL!

•

There is a limit on the amount

of text that can be entered into
  the working area.
This message appears if you
try to enter a character, a diac-
  ritical mark, return, new block
or space when the working
  area buffer is already full.

•

This message appears if a

text format (font, size width,
style, underling and framing,
or color) key is pressed when
the working area buffer is
already full.

•

This message appears if the

RETURN

key is pressed in

Symbol or Bar code mode
when the working area buffer
is already full.

•

This message appears if you

try to join a text file recalled
from the memory to the current
message area buffer is already
full.

•

You cannot enter any addi-

  tional text in this text mess-
  age. Delete some existing
text so that more text can be
  entered.

•

Press the

CANCEL

key and

delete some of the text before
changing the text format.

•

Press the

CANCEL

key and

delete some of the text before
entering a symbol or bar
code.

•

Press the

CANCEL

key and

delete some of the text before
joining the file to the current
message.

Summary of Contents for P-Touch 580C





























































































































































































Search results

Summary of Contents for P-Touch 580C

Reviews:

Related manuals for P-Touch 580C

Brands by name

Popular brands

Brother P-Touch 580C, User Manual

Search results

Summary of Contents for P-Touch 580C

Reviews:

Related manuals for P-Touch 580C

Brands by name

Popular brands