Brother P-Touch 580C User Manual Download Page 112

Page: 112 / 188

108

TO DELETE A FILE FROM THE MEMORY:

(1) Hold down the

CODE

key and press the

M.DEL

key.

(2) Press the

and

keys until the file you want to delete is displayed.

Hold down the

CODE

key and press the

SPACE

key to select all the

files in the memory. If you then decide not to delete all of the files in
the memory, hold down the

CODE

key and press the

CLEAR

key.

(3) Press the

RETURN

key. The message “OK TO DELETE?” or “CLEAR ALL?”

will be displayed.

(4) To confirm, press the

RETURN

key again. The selected file or files are deleted.

Press the

CANSEL

key or the

CODE

and

M.DEL

keys at any time to leave

Memory delete mode without deleting the selected file or files.

Summary of Contents for P-Touch 580C





























































































































































































Search results

Summary of Contents for P-Touch 580C

Reviews:

Related manuals for P-Touch 580C

Brands by name

Popular brands

Brother P-Touch 580C, User Manual

Search results

Summary of Contents for P-Touch 580C

Reviews:

Related manuals for P-Touch 580C

Brands by name

Popular brands