Brother P-Touch 580C User Manual Download Page 125

Page: 125 / 188

121

ERROR MESSAGE

CAUSE

REMEDY

CUT NOW

•

This message appears after

a label has been printed with
the Cut pause mode on or
before multi-color printing if
the end of the tape is incorrectly
positioned.

•

Press the tape cutter lever to

cut the tape.

EJECT CUT TAPE &
PRESS RETURN

•

This message appears when

the tape has been cut, but it
not removed.

•

Remove the cut excess tape

and press

RETURN

key.

ERROR!

•

This message appears if you

try printing in Interface mode
without installing the correct
tape cassette.

•

Press any key other then tape

CODE, SHIFT, ALT

CAPS

keys, then install the correct
tape cassette.

ERROR! UL/FRM

•

A maximum of 25 characters

can be underlined or framed.
This message appears if you
try to underline or frame more
then 25 characters.

•

Reduce the number of char-

acters that are underlined or
framed.

FIXED SIZE!

•

This message appears if the

RETURN key is pressed when
a TITLE font is selected.

•

This message appears if a 1/4”

(6-mm)- or 3/8” (9-mm)- wide
tape is installed when text is
entered using a TITLE font.

•

This message appears if the

character size is changed when
a TITLE font is selected.

•

Change the font.

•

Insert a tape cassette that is

wide enough for TITLE font
text to be printed on it.

•

Since the size is fixed, do not

change it.

INPUT ABCD AT
BEING & END

•

This message appears when

the CODABAR protocol is used
in Bar code mode, but a letter
between A and B has not been
entered at the beginning and end
of the bar code.

•

Enter a letter between A and

D at the beginning and end
of the bar code.

INPUT WHOLE CODE

•

In Bar code mode, the number

of digits required for a code can
sometimes be set.
This message appears if the set
number of digits are not entered
while inputting the bar code data.

•

Input the correct number of

digits or change the number
of digits set in the bar code
parameters.

Summary of Contents for P-Touch 580C





























































































































































































Search results

Summary of Contents for P-Touch 580C

Reviews:

Related manuals for P-Touch 580C

Brands by name

Popular brands

Brother P-Touch 580C, User Manual

Search results

Summary of Contents for P-Touch 580C

Reviews:

Related manuals for P-Touch 580C

Brands by name

Popular brands