Brother MFC-7340, User Manual, Page: 36 / 194

Chapter 4
26
Turning the TX Lock on/off
4
If you enter the wrong password when
following the instructions below, the LCD
shows
Wrong Password
. Re-enter the
correct password.
Turning TX Lock on
4
a
Press Menu , 1 , 8 , 1 .
b
Press
a
or
b
to choose
Set TX Lock
.
Press OK .
c
Enter the registered 4-digit password.
Press
OK .
The machine goes offline and the LCD
shows
TX Lock Mode
.
Turning TX Lock off
4
a
Press Menu .
b
Enter the registered 4-digit password.
Press
OK .
TX lock is automatically turned off.
Note
If you enter the wrong password, the LCD
shows
Wrong Password and stays
offline. The machine will stay in TX Lock
mode until the registered password is
entered.
Memory Security
(MFC-7450 only)
4
Memory Security lets you prevent
unauthorized access to the machine.
While Memory Security is on, the following
operations are available:
„ Receiving faxes into memory (limited by
memory capacity)
„ FAX Forwarding (if Fax Forwarding was
already on)
„ Remote Retrieval (if Fax Storage was
already on)
While Memory Security is on, the following
operations are NOT available:
„ Printing received faxes
„ Sending faxes
„ Copying
„ PC printing
„ Scanning
„ PC Fax Receive
Note
• To print the faxes in memory, turn off
Memory Security.
• You must turn off PC Fax Receive before
you can turn on Memory Security.
(See
Turning off remote fax options
on page 63.)
Setting up the password
4
Note
• If you have already set the password, you
will not need to set it, again.
• If you forget the Memory Security
password, please call your Brother dealer.
a
Press Menu , 1 , 8 , 1 .
b
Enter a four-digit number for the
password using numbers 0-9.
Press
OK .
c
Re-enter the password when the LCD
shows
Verify:
.
Press OK .
d
Press Stop/Exit .