Brother MFC-7340 User Manual Download Page 153

Page: 153 / 194

Menu and features

143

How to access the menu
mode

Press

Menu

Choose an option.

Press

for General Setup menu.

Press

for Fax menu.

Press

for Copy menu.

(MFC-7340 only)

Press

for Machine info. menu.

(MFC-7450 and MFC-7440N only)

Press

for LAN menu.

Press

for Machine Info. menu.

(MFC-7840N and MFC-7840W only)

Press

for Printer menu.

Press

for LAN menu.

Press

for Machine info. menu.

Press

for Service menu.

Press

for Initial Setup.

This will appear only when the LCD shows an
error message.

You can also scroll through each menu
level by pressing

for the direction

you want.

Press

when the option you want

appears on the LCD.
The LCD will then show the next menu
level.

Press

to scroll to your next menu

selection.

Press

When you have finished setting an
option, the LCD will show

Accepted

Press

Stop/Exit

to exit Menu mode.

Summary of Contents for MFC-7340



































































































































































































Search results

Summary of Contents for MFC-7340

Reviews:

Brother MFC-7340, User Manual, Page: 153 / 194

Search results

Summary of Contents for MFC-7340

Reviews: