manualshive.com logo in svg

Brother MFC-7340, User Manual, Page: 138 / 194

Share
Download
Brother MFC-7340 User Manual Download Page 138

128

Cleaning the laser scanner 
window

B

WARNING

 

Use neutral detergents.

 

 

DO NOT use any flammable substances, 
spray or organic solvent/liquids containing 
alcohol/ammonia to clean the inside or 
outside of the machine. Doing this may 
cause a fire or electrical shock. For more 
infomation see 

Important Safety 

Instructions

 on page 96.

 

CAUTION

 

DO NOT touch the laser scanner window 
with your fingers.

 

a

Before you clean the inside of the 
machine, turn off the machine.
Unplug the telephone line cord first, and 
then unplug the power cord from the 
electrical socket.

b

Open the front cover and slowly take out 
the drum unit and toner cartridge 
assembly.

 

 

WARNING

 

HOT SURFACE

After you have just used the machine, some 
internal parts of the machine will be 
extremely hot. To prevent injury, when you 
open the front or back cover (back output 
tray) of the machine, DO NOT touch the 
shaded parts shown in the illustration.

 

 

 

Summary of Contents for MFC-7340



































































































































































































Reviews:

No comments