manualshive.com logo in svg

Brother MFC-7340, User Manual, Page: 132 / 194

Share
Download
Brother MFC-7340 User Manual Download Page 132

122

CAUTION

 

We recommend that you place the drum 
unit and toner cartridge assembly on a 
clean, flat surface with a sheet of 
disposable paper or cloth underneath it in 
case you accidentally spill or scatter toner.

 

c

If you cannot remove the drum unit and 
toner cartridge assembly easily, do not 
use extra force. Instead, lift the scanner 
cover.

 

Use both hands to carefully pull the 
jammed paper up and out of the output 
tray opening.

 

d

Close the scanner cover.

e

If you cannot pull the jammed paper out 
of the output tray opening, take the 
paper tray completely out of the 
machine.

 

f

Pull the jammed paper out of the paper 
tray opening.

 

g

Put the drum unit and toner cartridge 
assembly back in the machine.

 

h

Put the paper tray back in the machine.

i

Close the front cover.

Summary of Contents for MFC-7340



































































































































































































Reviews:

No comments