manualshive.com logo in svg

Brother MFC-7340, User Manual, Page: 26 / 194

Share
Download
Brother MFC-7340 User Manual Download Page 26

Chapter 2

16

Recommended paper specifications

2

The following paper specifications are suitable for this machine.

Handling and using special 
paper

2

The machine is designed to work well with 
most types of xerographic and bond paper. 
However, some paper variables may have an 
effect on print quality or handling reliability. 
Always test samples of paper before 
purchasing to ensure desirable performance. 
Store paper in its original packaging and keep 
it sealed. Keep the paper flat and away from 
moisture, direct sunlight and heat.

Some important guidelines when selecting 
paper are:

„

Do not use inkjet paper because it may 
cause a paper jam or damage your 
machine.

„

Preprinted paper must use ink that can 
withstand the temperature of the 
machine's fusing process (200 degrees 
centigrade).

„

If you use bond paper, paper having a 
rough surface or paper that is wrinkled or 
creased, the paper may exhibit degraded 
performance.

Types of paper to avoid

2

CAUTION

 

Some types of paper may not perform well 
or may cause damage to your machine.

DO NOT use paper:

• that is highly textured

• that is extremely smooth or shiny

• that is curled or warped

 

1 2 mm

• that is coated or has a chemical finish

• that is damaged, creased or folded

• that exceeds the recommended weight 

specification in this guide

• with tabs and staples

• with letterheads using low temperature 

dyes or thermography

• that is multipart or carbonless

Basis weight 

75-90 gsm

Thickness

80-110 µm

Roughness

Higher than 20 sec.

Stiffness

90-150 cm

3

/100

Grain direction

Long grain

Volume resistivity

10e

9

-10e

11

 ohm

Surface resistivity

10e

9

-10e

12

 ohm-cm

Filler

CaCO

3

 (Neutral)

Ash content

Below 23 wt%

Brightness

Higher than 80 %

Opacity

Higher than 85 %

1

1

Summary of Contents for MFC-7340



































































































































































































Reviews:

No comments