manualshive.com logo in svg

Brother MFC-7340, User Manual, Page: 193 / 194

Share
Download
Brother MFC-7340 User Manual Download Page 193

For Australia Only:

Warranty & Repair – For details about warranty on your Brother Product, the details are listed on 
the following link: 

www.brother.com.au

 under Warranty. For warranty service (repair) of your 

Brother product you will need to retain a copy of your sales docket and contact the Support Centre 
for location of the nearest Authorised Warranty Centre (AWC)

Support – For technical support for your Brother Product other than what you can resolve through 
the User’s Guide, please visit our website or our solutions website for FAQs/Troubleshooting, 
Drivers & Software, or contact the Product Support Centre for any technical or customer 
care/support enquiry.

Product Support Centre: Australia

Brother International (Aust) Pty Ltd

Phone:             02 8875 6000

Fax:                 02 9870 7223

Email:              

[email protected]

Web Site:         

www.brother.com.au

Solutions Site: 

http://solutions.brother.com

Summary of Contents for MFC-7340



































































































































































































Reviews:

No comments