manualshive.com logo in svg

Brother MFC-7340, User Manual, Page: 149 / 194

Share
Download
Brother MFC-7340 User Manual Download Page 149

Troubleshooting and routine maintenance

139

B

 

To prevent damage to the machine caused 
by static electricity, DO NOT touch the 
electrodes shown in the illustration.

 

 

c

Push down the green lock lever and take 
the toner cartridge out of the drum unit.

CAUTION

 

To avoid print quality problems, DO NOT 
touch the shaded parts shown in the 
illustrations.

 

 

 

 

Wait to unpack a new drum unit until 
immediately before you put it in the 
machine. Exposure to direct sunlight or 
room light may damage the drum unit.

 

Note

Be sure to seal up the used drum unit 
tightly in a bag so that toner powder does 
not spill out of the unit.

 

d

Unpack the new drum unit.

e

Put the toner cartridge firmly into the 
new drum unit until you hear it lock into 
place. If you put the cartridge in 
correctly, the green lock lever will lift 
automatically.

 

CAUTION

 

Make sure that you put in the toner 
cartridge correctly or it may separate from 
the drum unit.

 

f

Clean the corona wire of the drum unit 
by gently sliding the green tab from right 
to left and left to right several times.

 

CAUTION

 

Be sure to return the green tab to the home 
position (

a

) (1). If you do not, printed pages 

may have a vertical stripe.

 

1

Summary of Contents for MFC-7340



































































































































































































Reviews:

No comments