manualshive.com logo in svg

Brother MFC-7340, User Manual, Page: 20 / 194

Share
Download
Brother MFC-7340 User Manual Download Page 20

Chapter 2

10

Note

(For Asia) For Legal size paper, press the 
release button in the bottom of the paper 
tray and then pull out the back of the paper 
tray. (Legal size paper is not available in 
some regions)

 

 

c

Put paper in the tray, and make sure that 
the paper is below the maximum paper 
mark (1). The side to be printed on must 
be face down.

 

CAUTION

 

To prevent damage to your machine 
caused by paper misfeeding, make sure the 
paper guides touch the sides of the paper.

 

d

Put the paper tray firmly back in the 
machine. Make sure that it is completely 
inserted into the machine.

e

Fold out the support flap (1) to prevent 
paper from sliding off the face-down 
output tray.

 

Loading paper in the manual 
feed slot

2

You can load envelopes and special print 
media one at a time into this slot. Use the 
manual feed slot to print or copy on labels, 
envelopes or thicker paper.

Printing on plain paper, recycled 
paper or transparencies from the 
manual feed slot

2

Note

The machine automatically turns on the 
Manual Feed mode when you put paper in 
the manual feed slot.

 

a

Lift up the support flap (1) to prevent 
paper from sliding off the face-down 
output tray, or remove each page as 
soon as it comes out of the machine.

 

1

1

1

Summary of Contents for MFC-7340



































































































































































































Reviews:

No comments