Brother MFC-7340 User Manual Download Page 134

Page: 134 / 194

124

Paper is jammed inside the drum unit
and toner cartridge assembly

Open the front cover.

Slowly take out the drum unit and toner
cartridge assembly.

CAUTION

We recommend that you place the drum
unit and toner cartridge assembly on a
clean, flat surface with a sheet of
disposable paper or cloth underneath it in
case you accidentally spill or scatter toner.

Push down the green lock lever and take
the toner cartridge out of the drum unit.

CAUTION

Handle the toner cartridge carefully. If toner
scatters on your hands or clothes, wipe or
wash it off with cold water at once.

To avoid print quality problems, DO NOT
touch the shaded parts shown in the
illustrations below.

Clear the jammed paper if there is any
inside the drum unit.

Summary of Contents for MFC-7340



































































































































































































Search results

Summary of Contents for MFC-7340

Reviews:

Brother MFC-7340, User Manual, Page: 134 / 194

Search results

Summary of Contents for MFC-7340

Reviews: