Brother HL-1020 Service Manual Download Page 266

Page: 266 / 305

USER’S GUIDE

5-14

6. Clean the primary corona wire inside the drum unit by gently sliding

the tab to the right and left several times.

Fig. 5-23 Cleaning the Primary Corona Wire

7. Return the tab to the home position (

▲

mark position) before

reinstalling the drum unit.

Caution

Be sure to position the tab at the home position, or printed pages may
have vertical stripes.

8. Install the drum unit into the printer.

See the section “REPLACING THE DRUM UNIT” in Chapter 5

9. Close the top cover.

10. Plug in the power cord and turn on the

power

switch.

Home Position (

▲

)

Summary of Contents for HL-1020


















































































































































































































































































































Search results

Summary of Contents for HL-1020

Reviews:

Related manuals for HL-1020

Brands by name

Popular brands

Brother HL-1020, Service Manual

Search results

Summary of Contents for HL-1020

Reviews:

Related manuals for HL-1020

Brands by name

Popular brands