Home
/
Brother
/
HL-1020
/
Service Manual

Brother HL-1020, Service Manual, Page: 223 / 305

Share

Page: 223 / 305

Brother HL-1020 Service Manual Download Page 223

1-3

System Requirements in Brother Printing Solution for Windows

Check the following system requirements to setup and operate the printer
in Brother Printing Solution for Windows:

IBM PC or compatible with 80486 SX or higher microprocessor

Parallel interface (or printer port)

4 MB or more of memory (8 MB recommended)

10 MB of space available on your hard disk for the printer driver and all

fonts

Microsoft Windows 95/98, 3.1/3.11 or Windows NT 4.0

!

Caution

The HL-820/1020 printer has been designed specifically for Windows
95/98, 3.1/3.11 and Windows NT 4.0. It cannot work in a DOS
environment such as MS-DOS.

Features

This printer has the following features:

❏

High

Resolution and Fast Printing Speed

HL-820 :

True 600 dots per inch (dpi) with microfine toner and up to 8
pages per minute (ppm) printing speed (A4 or Letter paper).

HL-1020 :

True 600 dots per inch (dpi) with microfine toner and up to 10
pages per minute (ppm) printing speed (A4 or Letter paper).

HL-1040 :

True 600 dots per inch (dpi) with microfine toner and up to 10
pages per minute (ppm) printing speed (A4 or Letter paper).

HL-1050 :

True 600 dots per inch (dpi) and 1200 x 600 dpi for graphics with
microfine toner and up to 10 pages per minute (ppm) printing
speed (A4 or Letter paper).

❏

Versatile Paper Handling

The printer has a multi-purpose sheet feeder and straight paper path
mechanism. Using this mechanism, you can load A4, letter, legal, B5,
A5, A6 and executive sizes of paper, and various types of paper
including envelopes, organizer paper, and your custom paper size.
The multi-purpose sheet feeder also allows manual paper loading, so
you can also use labels and transparencies.

«
...
221
222
223
224
225
...
»

Summary of Contents for HL-1020


















































































































































































































































































































Reviews:

No comments