manualshive.com logo in svg

Brother HL-1020, Service Manual

Introducing the Brother HL-1020, a reliable and efficient printer designed to meet your printing needs. Easily access the comprehensive Parts Reference List and user manual for your convenience. Download these essential resources for free from manualshive.com and optimize your printing experience with this remarkable product.

Share
Download
background image

USER’S GUIDE

6-16

Question

Recommendation

Printed pages are blurred at the
center or either edge.

Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come together rightA 

now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come togetherA 

right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to beA 

free. Come together right now, over me.  Here come Pat-top  ,he come. Diamonde the skyLucy in  with . 

AA One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top 

,heAA come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come 

Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here 

come Flat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky right now, over me.  

in the sky Lucy Diamonde with . Here come Pat-top ,he come. One thing I can tell you is you go to be free. 

Come AAA together right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you go to 

be free. A Come together right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you 

go to be free.  together Comeright now, over me.  Here come Pat-top ,he come. One thing I can tell you is 

you goA to be free. Come together right now, over me.  Here come Pat-top ,he come. Lucy in the sky with 

AAAAA Diamonde. One thing I can tell you is you go to be free. Come tin the sky right now, over me.  Here 

come  A Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over 

me.  HereA come Pat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky right 

now, over me. A Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together 

right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come 

together right now, over me.  Here come v ,he come. Lucy Diamonde in the sky with . One thing I can tell 

you is you go to be free. Come tin the skyright now, over me.  Here come Pat-top ,he come. One thing I 

can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he come. One 

thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he come. 

One thing I can tell A you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he 

come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-

top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come 

Pat-top ,he come. One A thing I can tell you is you go to be free. Come in the sky right now, over me.  Here 

come Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  

Here come Pat-top ,he A come. One thing I can tell you is you go to be free. Come in the sky right now, 

over me.  Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together right 

now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky 

right now, over me.  Here come Pat-top ,he come. Lucy in the sky with Amesist. One thing I can tell you is 

Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come together rightA 

now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come togetherA 

right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to beA 

free. Come together right now, over me.  Here come Pat-top  ,he come. Diamonde the skyLucy in  with . 

AA One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top 

,heAA come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come 

Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here 

come Flat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky right now, over me.  

in the sky Lucy Diamonde with . Here come Pat-top ,he come. One thing I can tell you is you go to be free. 

Come AAA together right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you go to 

be free. A Come together right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you 

go to be free.  together Comeright now, over me.  Here come Pat-top ,he come. One thing I can tell you is 

you goA to be free. Come together right now, over me.  Here come Pat-top ,he come. Lucy in the sky with 

AAAAA Diamonde. One thing I can tell you is you go to be free. Come tin the sky right now, over me.  Here 

come  A Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over 

me.  HereA come Pat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky right 

now, over me. A Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together 

right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come 

together right now, over me.  Here come v ,he come. Lucy Diamonde in the sky with . One thing I can tell 

you is you go to be free. Come tin the skyright now, over me.  Here come Pat-top ,he come. One thing I 

can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he come. One 

thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he come. 

One thing I can tell A you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he 

come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-

top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come 

Pat-top ,he come. One A thing I can tell you is you go to be free. Come in the sky right now, over me.  Here 

come Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  

Here come Pat-top ,he A come. One thing I can tell you is you go to be free. Come in the sky right now, 

over me.  Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together right 

now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky 

right now, over me.  Here come Pat-top ,he come. Lucy in the sky with Amesist. One thing I can tell you is 

Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come together rightA 

now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come togetherA 

right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Pat-top  ,he come. One thing I can tell you is you go to beA 

free. Come together right now, over me.  Here come Pat-top  ,he come. Diamonde the skyLucy in  with . 

AA One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top 

,heAA come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come 

Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here 

come Flat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky right now, over me.  

in the sky Lucy Diamonde with . Here come Pat-top ,he come. One thing I can tell you is you go to be free. 

Come AAA together right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you go to 

be free. A Come together right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you 

go to be free.  together Comeright now, over me.  Here come Pat-top ,he come. One thing I can tell you is 

you goA to be free. Come together right now, over me.  Here come Pat-top ,he come. Lucy in the sky with 

AAAAA Diamonde. One thing I can tell you is you go to be free. Come tin the sky right now, over me.  Here 

come  A Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over 

me.  HereA come Pat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky right 

now, over me. A Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together 

right now, over me.  Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come 

together right now, over me.  Here come v ,he come. Lucy Diamonde in the sky with . One thing I can tell 

you is you go to be free. Come tin the skyright now, over me.  Here come Pat-top ,he come. One thing I 

can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he come. One 

thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he come. 

One thing I can tell A you is you go to be free. Come in the sky right now, over me.  Here come Pat-top ,he 

come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come Pat-

top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  Here come 

Pat-top ,he come. One A thing I can tell you is you go to be free. Come in the sky right now, over me.  Here 

come Pat-top ,he come. One thing I can tell you is you go to be free. Come in the sky right now, over me.  

Here come Pat-top ,he A come. One thing I can tell you is you go to be free. Come in the sky right now, 

over me.  Here come Pat-top ,he come. One thing I can tell you is you go to be free. Come together right 

now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come tin the sky 

right now, over me.  Here come Pat-top ,he come. Lucy in the sky with Amesist. One thing I can tell you is 

Fig. 6-14 Blurred Page

Certain environmental conditions such as humidity,
high temperatures, etc. may cause this situation to
occur.
 Make sure that the printer is placed on a flat,

horizontal surface.

 Remove the drum unit with the toner cartridge

installed. Try shaking them from side to side.

 You may clear the problem by wiping the scanner

windows with a soft cloth. (

See “Cleaning the

Printer Interior and Drum Unit.”

)

      If the same problem occurs after cleaning and

Drum

 lamp is still on, replace the drum unit with

a new one.

Ghost images show up on
printed pages.

Fig. 6-15 Ghost Images

 Make sure that you use paper that meets the

specifications. Rough surface or thick media can
cause the problem.

 Make sure that you select the appropriate media

type in the pritner driver.

✒

Note

The drum unit is a consumable, and it is necessary to replace it
periodically.

Summary of Contents for HL-1020


















































































































































































































































































































Reviews:

No comments

Related manuals for HL-1020

Panasonic Panafax UF-7000 Network Connection preview
Panafax UF-7000
Brand: Panasonic Pages: 28
Panasonic KX-PS8000 Setup Manual preview
KX-PS8000
Brand: Panasonic Pages: 68
Panasonic KX-MC6020 Instrucciones De Funcionamiento preview
KX-MC6020
Brand: Panasonic Pages: 120
Panasonic Workio DP-C262 Operating Instructions Manual preview
Workio DP-C262
Brand: Panasonic Pages: 100
Panasonic KX-MB781 - B/W Laser - All-in-One Instrucciones De Funcionamiento preview
KX-MB781 - B/W Laser - All-in-One
Brand: Panasonic Pages: 96
Panasonic Workio DP-6010 Operating Instructions Manual preview
Workio DP-6010
Brand: Panasonic Pages: 130
Oki 10i Maintenance Manual preview
10i
Brand: Oki Pages: 210
Panasonic FP-D355 User Manual preview
FP-D355
Brand: Panasonic Pages: 77
Panasonic FP-7818 Service Manual & Parts Manual preview
FP-7818
Brand: Panasonic Pages: 402
Panasonic DP-8020E Quick Manual preview
DP-8020E
Brand: Panasonic Pages: 54
Panasonic Workio DP-8016P Operating Instructions Manual preview
Workio DP-8016P
Brand: Panasonic Pages: 88
Panasonic DP-1510P Operating Instructions Manual preview
DP-1510P
Brand: Panasonic Pages: 60
uBuild-3D MR BOT 280 Quick Start Manual preview
MR BOT 280
Brand: uBuild-3D Pages: 12
Canon mg6400 series Quick Start Manual preview
mg6400 series
Brand: Canon Pages: 4
Xerox Phaser 6250DP Setup Manual preview
Phaser 6250DP
Brand: Xerox Pages: 2
Xerox Phaser 6280N Evaluator Manual preview
Phaser 6280N
Brand: Xerox Pages: 16
Fuji Xerox ApeoSport C5540I Quick Reference Manual preview
ApeoSport C5540I
Brand: Fuji Xerox Pages: 108
Intuitive PDPI Onscreen Manual preview
PDPI Onscreen
Brand: Intuitive Pages: 18

Brands by name

Popular brands

Load more brands