Brother HL-1020 Service Manual Download Page 241

Page: 241 / 305

USER’S GUIDE

3-2

Data (Toner) Lamp

The

Data

lamp indicates the current status of the print data process.

Lamp

Printer status

Off

❍

The printer has no print data.

Blinking

❍↔●

The printer is receiving data from the computer or
the printer is processing data in memory.

●

Print data remains in the printer memory. If the

Data

lamp is on for a long period of time and

nothing has printed, you need to press the

switch

to print the remaining data.

This lamp also works as the

Toner

lamp with the

Alarm

lamp. They

blink simultaneously to indicate a toner error.

See “REPLACING THE

TONER CARTRIDGE” in Chapter 5 and “Operator Calls” in Chapter 6

Drum Lamp

The

Drum

lamp indicates the drum unit is nearly at the end of its life.

Lamp

Printer status

Off

❍

The drum unit can be used.

●

The drum unit is nearly at the end of its life.
Installing a new drum unit turns off this lamp.

See

“REPLACING THE DRUM UNIT” in Chapter 5.

Alarm Lamp

The

Alarm

lamp blinks to indicate a printer error status such as “

COVER

OPEN

” and “

MEMORY FULL

.” If any other error occurs, the printer

indicates the error by blinking the

Alarm

lamp with another lamp or by

printing an error report.

✒

Note

The

Ready

Data

and

Drum

lamps are used to indicate printer errors

with the

Alarm

lamp

. See “ALARM INDICATIONS AT A GLANCE”

in Chapter 6

and take corrective action for the error.

Summary of Contents for HL-1020


















































































































































































































































































































Search results

Summary of Contents for HL-1020

Reviews:

Related manuals for HL-1020

Brands by name

Popular brands

Brother HL-1020, Service Manual

Search results

Summary of Contents for HL-1020

Reviews:

Related manuals for HL-1020

Brands by name

Popular brands