manualshive.com logo in svg

Brother HL-1020, Service Manual, Page: 183 / 305

Share
Download
Brother HL-1020 Service Manual Download Page 183

9

Insert the supplied CD-ROM into the
drive of your PC.

Select “CD-ROM drive.”

Click the 

Next

 button

Click the 

Next

 button.

The USB driver is installed.

When the dialog shown above appears on
your PC, click the 

Finish

 button.

Be sure to restart Windows 98 so that
the installed USB driver will be
effective.

When the installation of the USB driver is complete, install the printer driver.

From CD-ROM:  

Run the CD-ROM program and go to the ‘Install driver’ menu.

From Floppy disk:

Refer to the Software Quick Setup Guide.

Set the printer port to USB

After installing the USB driver and printer driver, the printer port has to be set to ‘USB port’.
1. Click the 

Start

 button and select 

Printers

 in 

Settings

.

2. Select the HL-1050 icon in printers so that the HL-1050 icon is highlighted.
3. Select 

Properties

 from 

File

 menu.

4. Click 

Details

 tab.

5. Select 

BRUSB

:(USB Printer Port) in the box for “Print to the following port”.

6. Click 

OK

 to close the properties dialog box.

4

5

6

Summary of Contents for HL-1020


















































































































































































































































































































Reviews:

No comments