manualshive.com logo in svg

Brother HL-1020, Service Manual, Page: 193 / 305

Share
Download
Brother HL-1020 Service Manual Download Page 193

-19 -

Using the Printer Status Monitor Program

Type 

C:\RPCX>STMX

 and press the 

Enter

 key to make the Printer Status Monitor Program

stay resident in your computer memory. If there are any changes to the printer status, it
displays a message on your computer screen.

If the printer status monitor program stays resident in your computer, you can monitor the
printer status on your computer screen immediately using the hot-key sequence (

Ctrl

+

Alt

+

R

).

To remove the Printer Status Monitor program from your computer memory, type

C:\RPCX>STMX/R

 and press the 

Enter

 key.

❏

The RPC works in the environment where your printer is directly connected to your
computer. If you are using any printer buffer switches which do not support bi-directional
communication between the printer and computer, the program works only in the PC to
printer direction and cannot receive printer status information.

❏

The program does not work with printers on a network.

❏

If the RPC conflicts with some application software, exit your application software and
then run the RPC.

❏

The RPC may work in the DOS-compatible box screen mode of Windows, however, it is
recommended that you completely exit from Windows to the DOS prompt before using the
RPC.

❏

The Printer Status Monitor and some other Terminate-and-Stay programs cannot coexist in
the computer’s memory. If they do not work properly together, use them one at a time.
You can suspend the Printer Status monitor with any of the following methods or
commands.

Type 

C:\RPCX>STMX/R

 and press the 

Enter

 key.

Hold the space bar down while executing the 

AUTOEXEC.BAT

 file at DOS startup to

prevent the status monitor being loaded as a TSR program.

Summary of Contents for HL-1020


















































































































































































































































































































Reviews:

No comments