Home
/
Brother
/
HL-1020
/
Service Manual

Brother HL-1020, Service Manual, Page: 298 / 305

Share

283 pages before
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305

Page: 298 / 305

Brother HL-1020 Service Manual Download Page 298

USER’S GUIDE

A-14

Trademarks

The Brother logo is a registered trademark of Brother Industries, Ltd.

Apple, the Apple Logo, and Macintosh are trademarks, registered in the
United States and other countries, and TrueType is a trademark of Apple
Computer, Inc.
Epson is a registered trademark and FX-80 and FX-850 are trademarks of
Seiko Epson Corporation.
Hewlett Packard is a registered trademark and PCL, HP LaserJet 6P, 6L, 5P, 5L,
4, 4L 4P, III, IIIP, II, and IIP are trademarks of Hewlett-Packard
Company.
IBM, IBM PC, and Proprinter are registered trademarks of International
Business Machines Corporation.
Microsoft and MS-DOS are registered trademarks of Microsoft
Corporation. Windows is a registered trademark of Microsoft Corporation
in the U.S. and other countries.

All other brand and product names mentioned in this User’s Guide are
registered trademarks of their respective companies.

Compilation and Publication Notice

Under the supervision of Brother Industries Ltd., this manual has been
compiled and published, covering the latest product’s descriptions and
specifications.

The contents of this manual and the specifications of this product are
subject to change without notice.

Brother reserves the right to make changes without notice in the
specifications and materials contained herein and shall not be responsible
for any damages (including consequential) caused by reliance on the
materials presented, including but not limited to typographical and other
errors relating to the publication.

©1998 Brother Industries Ltd.

«
...
296
297
298
299
300
...
»

Summary of Contents for HL-1020


















































































































































































































































































































Reviews:

No comments