Brother HL-1020 Service Manual Download Page 12

Page: 12 / 305

I-6

2.6

Paper

(1)

Paper type

(a)

Normal paper (60 to 157g/m

, specified types of high-quality paper)

• A4 size
• Letter size
• Legal size
• B5 (JIS ISO) size
• A5 size
• A6 size
• Executive size

* The recommended types of plain paper are as follows:

Letter : Xerox 4200 (75g/m

)

A4 :

Xerox 80 Premier Paper (80g/m

)

(b)

Special paper (specified types)

• Labels
• Envelopes (DL,

, C5, COM10, Monarch)

• Organizers (K, L, and J sizes of DAY-TIMERS)

(C)

Other detailed specifications

Cut Sheet

Envelope

Basis Weight

60 to 158 g/m

(16 to 42 lb.)

75 to 90 g/m

(20 to 24 lb.)

single thickness

Caliper

0.03 to

0.08 in.

(0.08 to 0.2 mm)

0.0033 to 0.0058 in.
(0.084 to 0.14 mm)
single thickness

Moisture Content

4% to 6% by weight

Smoothness

100 to 250 (Sheffield)

Caution:

Although the printer can handle 9 inches (229mm) width paper such as the C4 size
envelope, you may get stains on the paper outside 8.5 inches width or on the back of
the paper.

It is recommended to use long-grained paper for the best print quality. If short-grained
paper is being used, it might be the cause of paper jams.

Use neutral paper. Do not use acid paper to avoid any damage to the printer drum
unit.

(2)

Paper feed conditions

Type

Name

Feeder

Manual feed

60 to 80 g/m

(200 sheets)

Normal paper (cut sheet)

80 g/m

paper (Legal)

(100 sheets)

158 g/m

(30 sheets)

Labels

(50 sheets)

Special paper (cut sheet)

Envelopes

(10 sheets)

Organizers

(10 sheets)

PR98184

Summary of Contents for HL-1020


















































































































































































































































































































Search results

Summary of Contents for HL-1020

Reviews:

Brother HL-1020, Service Manual, Page: 12 / 305

Search results

Summary of Contents for HL-1020

Reviews: