manualshive.com logo in svg

Brother HL-1020, Service Manual

Introducing the Brother HL-1020, a reliable and efficient printer designed to meet your printing needs. Easily access the comprehensive Parts Reference List and user manual for your convenience. Download these essential resources for free from manualshive.com and optimize your printing experience with this remarkable product.

Share
Download
background image

CHAPTER 6 TROUBLESHOOTING

6-15

Question

Recommendation

Toner scatters and stains the
printed page.

Fig. 6-10 Scattering Toner

Clean the printer interior. 

See “Cleaning the Printer

Interior and Drum Unit” in Chapter 5.

Make sure that you use paper that meets
specifications.

After the new toner cartridge is installed,  the first 10
- 20 pages may be stained with toner.  This problem
will be cleared after the first 10-20 pages with the
new toner cartridge.

If you still have the same problem and the 

Drum

lamp is on, replace the drum unit with a new one.

The whole page is printed in
black.

Fig. 6-11 Black Page

Wipe the electric terminals 

referring to “Cleaning the

Printer Interior and Drum Unit” in Chapter 5

. Never

use heat-sensitive paper as it will cause this problem.

If the same problem occurs and the 

Drum

 lamp is

still on after cleaning, replace the drum unit with a
new one.

Nothing is printed on the page.

Fig. 6-12 White Page

 Make sure that the toner cartridge is not empty.

 Wipe the electric terminals 

referring to “Cleaning

the Printer Interior and Drum Unit” in Chapter 5

.

 Make sure that a torn piece of paper does not

remain on the scanner window.

Printed pages are marked at
regular intervals.

Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together rightA 

now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come togetherA 

right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to beA 

free. Come together right now, over me.  Here come Flat-top ,he come. Lucy in the sky with Diamonde. AA 

One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,heAA 

come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top 

,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-

top ,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Lucy in the 

sky with Diamonde. Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be 

free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you goA 

to be free. Come together right now, over me.  Here come Flat-top ,he come. Lucy in the sky with AAAAA 

Diamonde. One thing I can tell you is you go to be free. Come together right now, over me.  Here come  A 

Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over me.  HereA 

come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over me. A 

Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Flat-top ,he come. Lucy in the sky with Diamonde. One thing I can tell you is you go 

to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you 

go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is 

you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell A 

you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can 

tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I 

can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One A 

thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. 

One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he A 

come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top 

,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-

top ,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come 

Flat-top ,he come. Lucy in the sky with Diamonde. One thing I can tell you is you go to be free. Come AAA 

Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together rightA 

now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come togetherA 

right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to beA 

free. Come together right now, over me.  Here come Flat-top ,he come. Lucy in the sky with Diamonde. AA 

One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,heAA 

come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top 

,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-

top ,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Lucy in the 

sky with Diamonde. Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come AAA 

together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. A 

Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you go to be 

free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you goA 

to be free. Come together right now, over me.  Here come Flat-top ,he come. Lucy in the sky with AAAAA 

Diamonde. One thing I can tell you is you go to be free. Come together right now, over me.  Here come  A 

Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over me.  HereA 

come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over me. A 

Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, over 

me.  Here come Flat-top ,he come. One thing I can tell you is you go to be free. Come together right now, 

over me.  Here come Flat-top ,he come. Lucy in the sky with Diamonde. One thing I can tell you is you go 

to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is you 

go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell you is 

you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can tell A 

you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I can 

tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One thing I 

can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. One A 

thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he come. 

One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top ,he A 

come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-top 

,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come Flat-

top ,he come. One thing I can tell you is you go to be free. Come together right now, over me.  Here come 

Flat-top ,he come. Lucy in the sky with Diamonde. One thing I can tell you is you go to be free. Come AAA 

Fig. 6-13 Example of Regular

Marking

The problem may disappear by itself. Try printing
multiple pages to clear this problem especially if the
printer has not been used for a long time.

If the surface of the drum has been scratched, replace
the drum unit with a new one.

If the problem does not disappear, it may be that the
drum has been marked or damaged due to excessive
exposure to light. In this case, replace the drum unit
with a new one.

Summary of Contents for HL-1020


















































































































































































































































































































Reviews:

No comments

Related manuals for HL-1020

Olympus P 400 Owner'S Manual preview
P 400
Brand: Olympus Pages: 71
Lexmark Jetprinter Disney Edition Z615 Series Quick Start Manual preview
Jetprinter Disney Edition Z615 Series
Brand: Lexmark Pages: 2
Lanier LD225 Network Manual preview
LD225
Brand: Lanier Pages: 150
zortrax Inkspire Packing preview
Inkspire
Brand: zortrax Pages: 11
Lexmark 464de - X B/W Laser Install Manual preview
464de - X B/W Laser
Brand: Lexmark Pages: 27
Konica Minolta bizhub C250i Quick Manual preview
bizhub C250i
Brand: Konica Minolta Pages: 61
Inventorcloud Invent3d Series Unpacking Instructions preview
Invent3d Series
Brand: Inventorcloud Pages: 4
Ricoh Aficio 2238C Operating Instructions Manual preview
Aficio 2238C
Brand: Ricoh Pages: 126
Ricoh Aficio SP C730DN User Manual preview
Aficio SP C730DN
Brand: Ricoh Pages: 100
Gainscha GA-S300 User Manual preview
GA-S300
Brand: Gainscha Pages: 12
Mitsubishi CP-9500DW Features And Specifications preview
CP-9500DW
Brand: Mitsubishi Pages: 2
WANHAO Duplicator 5 User Manual preview
Duplicator 5
Brand: WANHAO Pages: 18
Lexmark X5495 Specifications preview
X5495
Brand: Lexmark Pages: 2
Geeetech Delta Rostock mini G2 Quick Starter Manual preview
Delta Rostock mini G2
Brand: Geeetech Pages: 85
SPRT SP-POS5810 User Manual preview
SP-POS5810
Brand: SPRT Pages: 12
Sharp MX-6500N Media Manual preview
MX-6500N
Brand: Sharp Pages: 38
Canon MB5450 Series Online Manual preview
MB5450 Series
Brand: Canon Pages: 1384
Canon LBP352 User Manual preview
LBP352
Brand: Canon Pages: 642

Brands by name

Popular brands

Load more brands