3-26
Installation and preparation
3-6-3. Firing adjustment
Because the ejection timing varies depending on the platen's height and properties of each print head, this function is
provided to adjust the ejection timing for each print head when any print head is replaced with a new one or after the
completion of the setup procedure, for instance. If you want to make adjustments after replacing the print head,
configure the initial settings after print head replacement before you do so.
(1)
Make several sheets of A4-size or letter-size paper (black paper or transparent sheet such as OHP sheet, and
white paper) available for use.
(2)
Make sure that the printer and PC are connected via a LAN cable.
(3)
On the PC, from [All Programs] in the Start menu, select the "GTX-6 Maintenance" from "Brother GTX-6 Tools".
(4)
After the window shown below appears, select [Firing Adjustment] and click [Next].
(5)
Perform the required operation by following the on-screen instructions in the dialog box.
After the adjustment is completed, the currently displayed screen will go back to the window mentioned above.
