1-6
Before Using Your Printer for the First Time
1-3. Other items you must make available for use
What you buy from our distributors
Cleaning solution
Pretreatment
AC power cord
<NOTE>
There is a risk of malfunction or fire if you use other cables than the specified one. Purchase the cable (optional item) from
your dealer. Also, do not use any extension cable.
Others
LAN cable (10BASE-T/100BASE-TX/1000BASE-T)
USB flash memory
Please use a FAT32-formatted USB flash memory of which storage capacity is 2 GB to 32 GB in total. You
cannot use a USB memory with security functions such as password lock function or beyond 32 GB.
Pure water
Pure water refers to clear water, such as distilled water or purified water, to dilute the pretreatment and
supply to the humidifier.
<NOTE>
Avoid using such water as tap water in which impurities are contained.
Heat press
It must deliver the performance through which the print range of the size of a platen to be used can be
covered and 180°C (356°F) can be kept for 35 seconds or more. At a fixing stage of the pretreatment, be
sure to use the heat press, but not an oven, to smoothen the surface fluff.
Peel-off sheet
Always use this sheet to flatten the fixed surface and enhance the peel property when fixating the
pretreatment and ink by means of the heat press.
☞
"5-3-1. Provisions for pretreatment >> P.5-5"
Silicone foam (of open-cell structure)
It is the foamed mattress which resists heat. Use this at a fixing stage through the use of the heat press.
Adhesive roller
Use these to remove lint from a T-shirt or debris from its surface.
Water supply to the humidifier
☞
"1-5-2. Water supply >>P.1-19"
