9-4
Error message
Error code
Error message
Description
Remedy
1033
[W Head Temp Rising]
The temperature of white
head A is rising.
Please wait until the temperature decreases.
If the problem persists, please contact your
dealer.
1034
[W Head Temp Rising]
The temperature of white
head B is rising.
Please wait until the temperature decreases.
If the problem persists, please contact your
dealer.
1060
[Temp Low]
The ambient temperature is
lower than the scope covered
by its warranty for the best
print result.
Raise your room temperature.
1061
[Temp High]
The ambient temperature is
higher than the scope
covered by its warranty for
the best print result.
Lower your room temperature.
1064
[Humidity too Low]
The humidity is lower than
the scope covered by its
warranty for the best print
result.
Turn on the humidification function and wait for
a while.
1065
[Humidity too High]
The humidity is higher than
the scope covered by its
warranty for the best print
result.
Lower your room humidity.
1070
[Battery Needs to Be
Replaced]
It is time to replace the
battery on the main board.
Note the error code and error message, and
notify your dealer.
1080
[Please Adjust RTC]
The built-in clock has not
been set up.
Note the error code and error message, and
notify your dealer.
1085
[Please Adjust RTC]
The built-in clock has not
been set up.
Note the error code and error message, and
notify your dealer.
1090
[Clean nozzle guard and
cap]
The cap needs to be
cleaned.
Select the [Clean nozzle guard and cap] menu
item to perform cleaning.
1091
[Clean nozzle guard and
cap]
The cap needs to be
cleaned.
Select the [Clean nozzle guard and cap] menu
item to perform cleaning.
1210
[Exhaust Fan Stop]
The mist collection fan (right
side) is not working.
Note the error code and error message, and
notify your dealer.
1211
[Exhaust Fan Stop]
The mist collection fan (left
side) is not working.
Note the error code and error message, and
notify your dealer.
1300
[Replace cap foam]
The cap foam needs to be
replaced.
Select the [Replace maintenance unit parts]
menu item and replace the cap foam.
1301
[Replace cap foam]
The cap foam needs to be
replaced.
Select the [Replace maintenance unit parts]
menu item and replace the cap foam.
1320
[Replace carriage foam]
The carriage foam needs to
be replaced.
Select the [Replace maintenance unit parts]
menu item and replace the carriage foam.
1321
[Replace carriage foam]
The carriage foam needs to
be replaced.
Select the [Replace maintenance unit parts]
menu item and replace the carriage foam.
1340
[Replace wiper]
The wiper needs to be
replaced.
Select the [Replace maintenance unit parts]
menu item and replace the wiper.
1341
[Replace wiper]
The wiper needs to be
replaced.
Select the [Replace maintenance unit parts]
menu item and replace the wiper.