7-14
What to do when needed
7-18. Static IP address setting
In the [IP Address Set] window, select the automatic acquisition or manual setting, and set up the [IP Address], [Subnet
Mask] and [Default Gateway] when you select the manual setting.
(1)
From the menu, select [Printer Setting] > [IP Address Set], and press
.
(2)
Select either [Automatic acquisition] or [Manual setting] and press
.
<TIPS>
If you select [Automatic acquisition], the screen will go back to the standby mode screen after the settings are automatically
acquired.
(3)
To make manual settings, press
to move to and select your desired position.
(4)
To make manual settings, press
to specify your desired numeric value.
(5)
When the
button is pressed, the selected value is accepted, and the display screen goes to the [IP
Address], [Subnet Mask] and [Default Gateway] in sequence.
<TIPS>
The display screen shown here has been taken as an example.
IP Address Set
OK to Subnet Mask Screen
IP Address
1 92.168.000.001
IP Address Set
OK to Gateway Screen
Subnet Mask
2 55.255.255.000
IP Address Set
Set OK
Default Gateway
0 00.000.000.000
IP Address Set
Automatic acquisition
Manual setting