36
Menu list
1st layer
2nd layer
Description
[Test Print]
[Nozzle Check CMYK]
This is the test pattern to check to see if ink-jet droplets are
ejected from the color heads properly or not.
[Nozzle Check White]
This is the test pattern to check to see if ink-jet droplets are
ejected from the white head(s) properly or not.
[Print Data Load]
With this menu item, any print data stored in a USB flash
memory (ARX4 file) is loaded into the system.
[Receiving History]
By selecting this menu item, you can display any print data
received in the order in which they are sorted from the
newest to the oldest ones, and you can select any one of
them.
[Maintenance]
[White Ink Circulation]
For details, please refer to "6. Basic printing procedures
>>P.122", "7. Precautions to keep good printing quality/use
printer over the long term >>P.172", or "9. Troubleshooting
>>P.235".
[White Ink Refilling]
[Maintenance Part
Clean/Replace]
[White Head Cleaning]
[Install White Ink After Cleaning]
[Head Replacement]
[Install Ink after Replacing Head]
[Initial Ink Installation]
[White Ink Pause Mode]
[Exchange Filter]
[Log copy to USB]
[Printer Setting]
[Print Direction]
For details, please refer to "7. Precautions to keep good
printing quality/use printer over the long term >>P.172" or "8.
What to do when needed >>P.222".
[Back Light]
[Auto Screen Erase Time]
[Menu TimeOut Setting]
[Speaker Volume]
[Temperature]
[Low Temperature Mode]
[Auto Cleaning Setting]
[Auto Cleaning Start Timing]
[CR Speed Adjustment]
[Flushing Interval Setting]
[Flushing Volume Setting]
[Auto Job Delete]
[Rcvng Prnt Setting]
[IP Address Set]
