265
Troubleshooting
(6)
Remove each tube from the print head to be replaced with a new one, then attach each of the new caps which are
removed from a new print head to each tube, while exercising care to prevent any ink from being spilled.
<IMPORTANT>
Care is needed in preventing any ink from being spilled from each tube.
Be careful not to confuse it with the tube for the print head on the white side.
When you replace the print head, be sure to move the carriage manually to the position of platen at the center of the printer
before starting the replacement. If you perform the mounting of the head when the carriage is directly above the
maintenance unit, it may damage the maintenance unit or the heads.
<NOTE>
For a proper work operation, be sure to wear the printer-provided gloves.
X0070
(7)
Remove the resin cover which are placed on the top of the carriage board.
(8)
Open the hold-down clip for the cable, and remove the flat cable.
X0071
Tube
Cap
Tube
Flat cable
Resin cover
Hold-down clip for cable
