Brother GTX-4 Instruction Manual Download Page 71

Page: 71 / 320

Creating print data

5-3. Printer driver's setting from Graphix Lab

(1)

Click [Print] to open the print setup dialog box of the printer driver.

(2)

In the dialog box for setting the printer driver, configure the required settings.

By clicking on the [Show Advanced Settings…], White ink settings, [Color Processing], and [Uni-Directional Printing] can be
configured.

<TIPS>



Depending on the settings you have made in the [Select Ink:] option or the like, setup items that appear on the screen vary.



The rollover help is displayed at right side of the dialog box. Place the mouse pointer over it to browse the help feature.



For the detailed description of setup items, refer to each chapter mentioned below.

Summary of Contents for GTX-4

































































































































































































































































































































Search results

Summary of Contents for GTX-4

Reviews:

Related manuals for GTX-4

Brands by name

Popular brands

Brother GTX-4, Instruction Manual

Search results

Summary of Contents for GTX-4

Reviews:

Related manuals for GTX-4

Brands by name

Popular brands