Brother GTX-4 Instruction Manual Download Page 24

Page: 24 / 320

Name and function of each component

2-1. Front part

X0031

No.

Name

Function

Front cover

Open this cover when cleaning the internal area of the printer.

Carriage

Holds the print head.

3 Obstacle

sensor

Checks the presence of any obstacles by their height (such as wrinkled T-shirt)
that are within range to collide with the print head.

4 Platen

sheet

It helps to keep the T-shirt from moving/shifting during printing so that an image
can be clearly printed.

Platen

It secures a T-shirt in place, which is to be printed.

Shoulder bar

Align the position of a T-shirt with this bar.

7 T-shirt

tray

This T-shirt tray holds such portions of T-shirt that droop down on it and feeds
the entire T-shirt into the printer.

USB flash insertion slot

Insert a USB flash memory into this slot.

LAN port

Into this port, insert the LAN cable which is to be connected with a PC.

10 USB port

Into this port, insert the USB cable which is to be connected with a PC.

Summary of Contents for GTX-4

































































































































































































































































































































Search results

Summary of Contents for GTX-4

Reviews:

Related manuals for GTX-4

Brands by name

Popular brands

Brother GTX-4, Instruction Manual

Search results

Summary of Contents for GTX-4

Reviews:

Related manuals for GTX-4

Brands by name

Popular brands